Preparation and physicochemical properties of konjac glucomannan ibuprofen ester as a polysaccharide-drug conjugate

Abstract

A novel drug-polysaccharide conjugate with konjac glucomannan (KGM) as a drug carrier was fabricated through the esterification of ibuprofen (IBU), an anti-inflammatory drug, with KGM. The influences of the reaction conditions, such as the amount of ibuprofen acryl chloride, reaction time, reaction temperature, and the amount of catalyst, on the degree of substitution were investigated. KGM ibuprofen ester (KGM-IBU) was characterized by Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD), solid-state ¹³C NMR, scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The hydrophobic structure of IBU in KGM-IBU was proven by the fluorescence emission spectra of pyrene. In addition, by using commercially available ibuprofen sustained-release capsules (IBU-SRC) as a control, the in vitro controlled release performance of KGM-IBU was evaluated. The cumulative release of IBU-SRC within 36?h was 94%, while that of KGM-IBU within 36?h was 77%. The results showed that KGM-IBU had better sustained-release performance without a burst release effect. The obtained products could be used as a potential biocompatible sustained-release drug delivery system.     

A cost-effective anionic flocculant prepared by grafting carboxymethyl cellulose and lignosulfonate with acrylamide

How to efficiently utilize most abundant biomass of cellulose, lignin and their derivatives has become an emerging challenge as the anticipative oil depletion. In this paper, the ternary anionic copolymer of carboxymethyl cellulose-acrylamide-lignosulfonate (CAL) was successfully prepared by hydrothermal polymerization. Based on the flocculation characteristics of cationic methylene blue, the optimal polymerization process was confirmed as the raw material ratio of 1:1:1, initiator dosage of 0.9 wt %, the reaction time was 5 h and the reaction temperature was 55 °C. The results showed that the decolorization ratio was 87.5% at the CAL dosage of 600 mg/L for the 500 mg/L methylene blue simulated wastewater. The CAL achieved fast flocculation kinetics and super color removal ratios in the wide ranges of environmental pH, temperature and salt concentration. The flocculation mechanism is single charge neutralization. Moreover, the estimated treatment cost of CAL is 68.3% lower than that of commercial anionic PAM. The prepared anionic CAL flocculant has the characteristics of environmental safety, excellent flocculation performance and cost-effectiveness, which shows great potential in the field of dye wastewater treatment, and also provides a feasible way for the effective utilization of biomass resources.

     

Controlled synthesis of dendritic ruthenium nanostructures under microwave irradiation and their catalytic properties for p-chloronitrobenzene hydrogenation

Transition Metal Chemistry - In this study, the shape-controlled synthesis of ruthenium (Ru) nanostructures was examined using microwave irradiation. Dendritic Ru nanostructures, with an average...     

Earth-abundant Metal-catalyzed Reductive Amination: Recent Advances and Prospect for Future Catalysis

Nitrogen-containing compounds, as an important class of chemicals, have been used widely in pharmaceuticals, materials synthesis. Transition metal-catalyzed reductive amination of an aldehyde or a ketone with ammonia or an amine has been proved to be an efficient and practical method for the preparation of nitrogen-containing compounds in academia and industry for a century. Given the above, several effective methods using transition metals have been developed in recent years. Noble transition metals like Pd, Pt, and Au-based catalysts have been predominately used in reductive amination. Because of their high prices, strict official regulations of residues in pharmaceuticals, and deleterious effects on the biological system, their industrial applications are severely hampered. With the increasing sustainable and environmental problems, the Earth-abundant transition metals including Ti, Fe, Co, Ni, and Zr have also been investigated for the reductive amination reaction and showed great potential to the advancement of sustainable and cost-effective reductive amination processes. This critical review will mainly summarize the work using Earth-abundant metals. The effects of different transition metals used in catalytic reduction amination were discussed and compared, and some suggestions were given. The last section highlights the catalytic activities of bi- and tri-metallic catalysts. Indeed, this latter family is very promising and simultaneously benefits from increased stability, and selectivity, compared to monometallic NPs, due to synergistic substrate activation. Few comprehensive reviews focusing on Earth-abundant transition metals catalyst has been published since 1948, although several authors reported some summaries dealing with one or the other part of this aspect. It is hoped that this critical review will inspire researchers to develop new efficient and selective earth-abundant metal catalysts for highly, environmentally sustainable reductive amination methods, as well as improve the pharmaceutical industry and related chemical synthesis company traditional method with the utilization of the green method widely.     

Metal-facilitated Photocatalytic Nanohybrids: Rational Design and Promising Environmental Applications

As a promising technique to potentially address the energy crisis and environmental issues, photocatalysis has been reported widely to exhibit various outstanding behaviors in production of new fuels/chemicals and treatment of contaminants. The photocatalytic performance is extremely dependent on the used photocatalysts, so that the design and preparation of efficient photocatalysts are critically important for significantly improving the photocatalytic activity. Among various strategies, the hybridization of metal with semiconductors has recently been attracting more and more research interest owing to their expended spectral absorption, promoted transferring rate of charge carriers and Plasmon-enhanced effect. In this minireview, the metal-facilitated hybrid photocatalysts are overviewed comprehensively to first reveal unique functions of metals in improvement of photoactivity and summarize the emerging metal-involved hybrid systems. Subsequently, the synthetic methods towards hybrid photocatalysts are introduced and their practical applications are emphasized in environmental remediation including degradation of organic pollutants, conversion of harmful gases, treatment of heavy metal ions and sterilization of bacteria. At the end, the challenges for industrializing these hybrid photocatalysts are discussed carefully and future development is suggested rationally.     

Scale-Up Preparation of Crocins I and II from Gardenia jasminoides by a Two-Step Chromatographic Approach and Their Inhibitory Activity Against ATP Citrate Lyase

Crocins are highly valuable natural compounds for treating human disorders, and they are also high-end spices and colorants in the food industry. Due to the limitation of obtaining this type of highly polar compound, the commercial prices of crocins I and II are expensive. In this study, macroporous resin column chromatography combined with high-speed counter-current chromatography (HSCCC) was used to purify crocins I and II from natural sources. With only two chromatographic steps, both compounds were simultaneously isolated from the dry fruit of Gardenia jasminoides, which is a cheap herbal medicine distributed in a number of countries. In an effort to shorten the isolation time and reduce solvent usage, forward and reverse rotations were successively utilized in the HSCCC isolation procedure. Crocins I and II were simultaneously obtained from a herbal resource with high recoveries of 0.5% and 0.1%, respectively, and high purities of 98.7% and 99.1%, respectively, by HPLC analysis. The optimized preparation method was proven to be highly efficient, convenient, and cost-effective. Crocins I and II exhibited inhibitory activity against ATP citrate lyase, and their IC₅₀ values were determined to be 36.3 ± 6.24 and 29.7 ± 7.41 μM, respectively.     

Translating Molecular Recognition into a Pressure Signal to enable Rapid,Sensitive, and Portable Biomedical Analysis

Herein, we demonstrate that a very familiar, yet underutilized, physical parameter—gas pressure—can serve as signal readout for highly sensitive bioanalysis. Integration of a catalyzed gas‐generation reaction with a molecular recognition component leads to significant pressure changes, which can be measured with high sensitivity using a low‐cost and portable pressure meter. This new signaling strategy opens up a new way for simple, portable, yet highly sensitive biomedical analysis in a variety of settings.     

Rapid determination of products of phenol hydrogenation in a supercritical water system using headspace gas chromatography

This paper reports a headspace analysis technique for the determination of products, i.e., cyclohexanone (CE) and cyclohexanol (CL), of phenol hydrogenation in a supercritical water reaction system (SWRS) with water removal by hydrate formation. An addition of anhydrous calcium chloride leads to water absorption resulting in crystal water; thus, the samples can be quantitatively measured without the influence of water. After achieving equilibrium at 150°C and maintaining it for 5 min, the obtained results showed a relative standard deviation of less than 5.3% and the recovery ranged from 93% to 104%. The presented method is simple and accurate for the analysis of CL, CE and phenol in samples from phenol conversion in SWRS.     

六核(3,3,4,5)-连接2-(4’-羧基苯基)咪唑-4,5-二羧酸金属有机配合物

用缩合氧化反应,成功合成了一个新的咪唑羧酸配体2-(4’-羧基苯基)咪唑-4,5-二羧酸(H4CPhIDC)。在水热条件下以H4CPhIDC为主配体,邻菲咯啉(phen)为辅助配体,合成了镉的六核金属有机配合物[Cd6(CPhIDC)(HCPhIDC)2(H2CPhIDC) (phen)6]?H2O (MOF)。H4CPhIDC配体在该配合物中呈现出不同的去质子模式H2CPhIDC2-、HCPhIDC3-、CPhIDC4-,从而形成了一个新的六核(3,3,4,5)-连接拓扑结构。测定了配体和配合物的固体荧光光谱,并用溴化乙锭荧光探针测定了配体和配合物与DNA及BSA的作用,结果表明,配合物对生物大分子的作用更强些。CCDC：969815。